7.4V / 2300mAh LiPo battery pack "Medi-Push battery" with illuminated push button battery control for switching heating levels for heating clothing.
The LiPo battery pack comes with an illuminated push button control. The push button is slightly raised and thus unerringly accessible. Its slight click when pressed provides tactile feedback. Thus, the setting of a desired heating level is optimally fulfilled.
The battery pack is switched on after pressing the pushbutton for 2 seconds at the highest heating level. After two further heating levels of 75% and 50%, the heating level starts again at 100%. The heating control is switched off with a 2-second push. The heating levels are indicated by illuminating the pushbutton in the colors red - blue - green.
Examples of use of a heating apparel
The battery pack with the heating control is carried in the jacket or trouser pocket. The battery pack can also be attached to the forearm or thigh by means of Velcro.
Application examples for heating gloves or 2 heating garments
The battery pack is carried in a jacket pocket, for example, and is to be connected by means of parallel Y-adaptors to the cable with 2 outlets leading upwards for the heatable underwear or for the gloves.
Alternatively, the battery is attached to a forearm using Velcro, with one Y-outlet pointing forward to the glove and the other back to the upper arm, with a 120cm or 180cm extension cable leading to the other glove.
You can specify the desired battery variants when ordering.
The heating power is approx. 18 watts with freshly charged batteries and 15 watts at nominal 7.4V when using heated gloves. Battery technology and heating power are optimally matched. However, if the current load exceeds 20 watts, e.g. because another heating garment is to be connected, a second battery pack is required to increase the current load capability and capacity. We can assemble further accumulator packs on request according to your needs (as double, triple or quadruple pack on top of each other or according to length or width next to each other).
Notes & features about the accumulators
The excellent quality of the individually tested accumulator packs, the very high-quality selection of the raw materials used as well as the electronic protective circuits integrated in the accumulator packs, including
Automatic switch-off
Balancer technology
Deep discharge protection
Short circuit with reverse polarity protection
Charge overvoltage protection
Discharge current control
Temperature protection
offer the greatest possible safety for demanding applications and thus correspond to professional battery technology and brand quality, which also stands for a very long battery life.
The battery, which is covered with a skin-friendly textile, is inserted into the breast pocket or battery pocket of an undershirt, undershirt or underpants, for example, and connected to it. The charging time of a rechargeable battery is about 2.3 hours, with the electronically controlled 2A fast charger 1.15 hours.
Adjustment of the battery capacity is possible on request!
- IMPORTANT NOTE: Items with custom design are excluded from the right of return or exchange. (see right of return / reasons for exclusion and expiration) -
- Battery pack
- Type: Lithium Polymer Battery Pack
- Capacity: 2.300mAh
- Voltage: 7,4V LiPo
- Charge current: max. 2A
- Discharge current: max. 2.3A
- Electronic protection circuits with balancer technology, deep discharge protection, overvoltage and automatic shutdown
- Connection cable with RCA plug (w)
- Dimensions: 55x65x15mm (LxHxD)
- Weight: ~80g
- Push button
- 3-stage push button heating control
- switching current: max. 3A
- switching levels: 100% (ON) - 75% - 50% - OFF
- Display of the heating power in the luminous colors red - blue - green
- Instruction manual
- 7,4V | 2.300mAh LiPo battery pack with electronic protection circuits
